Samsung PRO4838 Security Camera User Manual


 
Appendixes
137
Error messages
When the following error messages appear, try these remedies.
Error message Suggested remedies
DCF Full Error
File names do not match the DCF standard. Transfer the
les from the memory card to your computer and format
the card. Then, open the Settings menu and select File
No. Reset. (p. 134)
Device disconnected.
Network connection disconnected while transferring
photos. Reselect a device that supports AllShare Play.
File Error
Delete the damaged le or contact a service center.
File system not
supported.
Your camera does not support the FAT le structure of
the inserted memory card. Format the memory card on
the camera.
Initialization failed.
The camera has failed to locate a device that supports
AllShare Play. Turn on devices on the network that
support AllShare Play.
Invalid password.
The password for transferring les to another camera is
wrong. Enter the correct password.
Low Battery
Insert a charged battery or recharge the battery.
Error message Suggested remedies
Card Error
Turn o your camera, and then turn it on again.
Remove your memory card, and then insert it again.
Format your memory card.
Card Locked
You can lock an SD, SDHC, or SDXC card to prevent les
from being deleted. Unlock the card when shooting.
Card not supported.
The inserted memory card is not supported by your
camera. Insert a SD, SDHC, or SDXC memory card.
Connection failed.
The camera cannot connect to the network using the
selected access point. Select another AP and try again.
The camera has failed to connect to the other devices.
Try connecting again.