Filter
Top Products
Ś25ś
Flash ( ) / Left button
ƀ Using the flash frequently will reduce the life of the battery.
ƀ Under normal operating conditions the charging time for the flash is
normally within 5 seconds. If the battery is weak, the charging time will be
longer.
ƀ During the continuous shot, AEB, some scene modes (p.26) and movie clip
mode, the flash function will not operate.
ƀ Take photographs within the flash range.
ƀ The image quality is not guaranteed if the subject is too close or highly
reflective.
ƀ When taking an image in poorly lit conditions with the flash, there may be a
white speck in the captured image. The speck is caused by the reflecting of
the flash light from the atmospheric dust. It is not camera malfuction.
INFORMATION
ƀ Flash range
(Unit : m)
ƅ When the menu is displayed on the LCD monitor,
pressing the LEFT button makes the cursor shift to
the left tab.
ƅ When the menu is not displayed on the LCD
monitor, the LEFT button operates as the FLASH
( ) button.
ƀ Selecting the flash mode
1. Rotate the MODE DIAL to select a RECORDING mode with the exception of
Movie clip mode.
2. Press the Flash button until the desired flash mode indicator displays on the
LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
[ Selecting the Auto flash ]
Normal
WIDE TELE WIDE TELE WIDE TELE
0.8~3.0 0.8~2.5 0.3~0.8 0.4~0.8 0.3~3.0 0.4~2.5
Macro
Auto macro
ISO
AUTO