Filter
Top Products
Ś87ś
ƅ Connecting the camera to a PC
ƅ Disconnecting the camera and PC : Refer to page 89 (Removing the removable
disk).
żIf you selected [Printer] in Step 5, when you connect the camera to your
computer, the [Connecting Printer] message will display and the connection
will not be established.
In this case, disconnect the USB cable, and then follow the procedure from
Step 2 and onward.
Starting PC mode
ҟIf you connect the USB cable to a USB port on your PC and then turn on the
power, the camera will automatically switch to "computer connection mode".
ҟIn this mode, you can download stored images to your PC through the USB
cable.
ҟThe LCD monitor is always turned off in PC mode.
ƅ Camera settings for connection
1. Turn on the camera
2. Connect the camera and computer with the
supplied USB cable.
3. Turn on the computer. The camera and
computer are connected.
4. External device selection menu will display on
the LCD monitor.
5. Select the [Computer] by pressing the Up /
Down button and press the OK button.
Select USB
Computer
Printer
ConfirmOK