Filter
Top Products
《24》
Flash ( )/ Left button
●Flash range
(Unit : m)
■When the menu is displayed on the LCD monitor,
pressing the LEFT button makes the cursor shift to
the left tab.
■When the menu is not displayed on the LCD monitor,
the LEFT button operates as the FLASH
( ) button.
●Selecting the flash mode
1. Rotate the MODE DIAL to select a RECORDING mode with the exception of
MOVIE CLIP mode.
2. Press the Flash button until the desired flash mode indicator displays on the
LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
WIDE TELE WIDE TELE WIDE TELE
0.8 ~ 3.0 0.8 ~ 2.5 0.2~ 0.8 0.5 ~ 0.8 0.2 ~ 3.0 0.5 ~ 2.5
Normal Macro
Auto macro
ISO
AUTO
[Selecting the Auto flash]
●Using the flash frequently will reduce the life of the battery.
●Under normal operating conditions the charging time for the flash is
normally within 5 seconds. If the battery is weak, the charging time will be
longer.
●During the continuous shot, AEB, Motion capture, Interval shot and movie
clip mode, the flash function will not operate.
●Take photographs within the flash range.
●The image quality is not guaranteed if the subject is too close or highly
reflective.
●When taking an image in poorly lit conditions with the flash, there may be a
white speck in the captured image. The speck is caused by the reflecting of
the flash light from the atmospheric dust. It is not camera malfuction.
INFORMATION