Filter
Top Products
89
PictBridge: Picture Selection
Easy printing
When you connect the camera to printer in the Play back
mode, you can print a picture easily.
- Pressing the shutter button : Currently displayed image will
be printed with the printer’s
default setting.
- Pressing the Left/ Right button : Selects a previous/ next
image.
[When [One Pic] is selected] [When [All Pics] is selected]
- Press the Up/ Down button to select the number of prints.
- Use the Left/ Right button to select another picture and select the number of prints for
another picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the number of prints.
- The maximum numbers of prints are 100 and if you select the number over 100, [Out Of
Number] message will display.
0
141-0001
Setting the Number of Copies to Print
- Select [One Pic] or [All Pics]. A screen where you can set the number of copies to print will
appear as shown below.
Prev Next
Select pictures to print
1. The [Images] menu will appear.
2. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
When [One Pic] is selected : The PictBridge function will be
applied only to the picture
currently displayed.
When [All Pics] is selected : The PictBridge function will be
applied to all pictures,
excluding TIFF, movie clips
and voice files.
Exit:Shutter Set:OK
0
Exit:Shutter Set:OK
Images
Exit : MENU Move:
One Pic
All Pics
Print: Menu:OK