Filter
Top Products
20
E
❙
AGC/MOTION
In the AGC (Automatic Gain Control) option, you can specify
whether to automatically control the GAIN when the obtained
video is below a certain level of brightness because it was
recorded under insufficient lighting. To automatically control
the GAIN, set the AGC option to LOW or HIGH. Otherwise,
set it to OFF. If the you set the AGC option to LOW, the
maximum GAIN of the AGC will be set to low, and if set to
HIGH, the maximum GAIN will be set to high.
If the SHUTTER option is set to an auto low-speed, the AGC
option will change to the MOTION option. In the MOTION
option, use the LEFT and RIGHT buttons to select from S.S,
SLOW, NORMAL, FAST, and F.F.
<AGC>
<MOTION>
CAMERA ID ON...
IRIS ALC...
SHUTTER OFF
AGC LOW
WHITE BAL ATW1
FOCUS MODE AF
MOTION DET OFF
COLOR/BW COLOR
PRIVACY OFF
SPECIAL ...
PRESET ...
EXIT QUIT
CAMERA ID ON...
IRIS ALC...
SHUTTER AUTOX2
MOTION S.SLOW
WHITE BAL ATW1
FOCUS MODE AF
MOTION DET OFF
COLOR/BW COLOR
PRIVACY OFF
SPECIAL ...
PRESET ...
EXIT QUIT
19
❙
SHUTTER
In the SHUTTER menu, you may determine the fast
electronic shutter speed or slow AUTO shutter speed. The
fast electronic shutter supports 7 speeds from 1/100(1/120)
sec. to 1/10K sec. to photograph a bright and quick moving
image. The slow AUTO shutter supports about 10 speed
from x2 to x160 to make an image projected to the screen
more distinct and brighter by selecting the slow shutter
speed. If you want the camera to sense the brightness and
adjust the shutter speed accordingly, select a menu
commencing with Slow AUTO Shutter. When SHUTTER is
set to AUTO, AGC will be replaced with MOTION.
CAMERA ID OFF
IRIS ALC...
SHUTTER OFF
AGC LOW
WHITE BAL ATW1
FOCUS MODE AF
MOTION DET OFF
COLOR/BW COLOR
PRIVACY OFF
SPECIAL ...
PRESET ...
EXIT QUIT
➞
OFF ➞ AUTOX2 ➞ AUTOX4 ➞ AUTOX6 ➞ AUTOX8 ➞
AUTOX12 ➞ AUTOX16 ➞ AUTOX20 ➞ AUTOX40 ➞ AUTOX80
➞ AUTOX160 ➞ OFF ➞ 1/100(120) ➞ 1/250 ➞ 1/500 ➞ 1/1000
➞ 1/2000 ➞ 1/4000 ➞ 1/10K ➞ OFF
If you keep pressing and ➞ in the SHUTTER menu, the
speed will change in the following sequence.
➞
❖ When the IRIS mode is set to WDR, only the following
modes are available.
➞
OFF ➞ AUTOX2 ➞ AUTOX4 ➞ AUTOX6 ➞ AUTOX8 ➞
AUTOX12 ➞ AUTOX16 ➞ AUTOX20 ➞ AUTOX40 ➞ AUTOX80
➞ AUTOX160 ➞ OFF