Filter
Top Products
24
E
23
❙
COLOR / BW
COLOR/BW turns IR(Infrared) Filter on or off. In the poor
illumination environment, turns IR Filter off to raise the sensitivity
to the same level as an black-and-white camera while in the good
illumination environment, turns it on to convert to the COLOR
mode in the normal screen condition to lower the sensitivity.
✔
COLOR
This is the IR Filter ON mode with a normal color screen.
✔
BW...
This is the IR Filter OFF mode, black-and-white (with the
same sensitivity as a black-and-white camera). Select BW...
and press [Enter] and the BW submenu will appear. You may
determine to sent out BURST signals by ON or OFF setting
in this submenu.
❖
WHITE BAL will be marked --- so that setup is unavailable.
(BW)
BURST ON
RET
CAMERA ID OFF
IRIS ALC...
SHUTTER OFF
AGC LOW
WHITE BAL ---
FOCUS MODE AF
MOTION DET OFF
COLOR/BW BW...
PRIVACY OFF
SPECIAL ...
PRESET ...
EXIT QUIT
Press the
ENTER
button.
If you select ON and press the ENTER button, the MOTION DET
screen will come up. You can set the AREA to which the Motion
Detection function will be applied to either PRESET or USER. If
you set the AREA option to PRESET, the Motion Detection
function will be applied to the areas preset as factory defaults. If
you set the AREA option to USER and press the ENTER button,
you can change the area size and position and select the area
where you want to apply the Motion Detection function. You can
specify the size of the area by using the UP, DOWN, LEFT, and
RIGHT buttons. If the area is not flashing, press the ENTER
button. When the area starts flashing, use the UP, DOWN, LEFT
and RIGHT buttons to specify the location of the area. Use the
ENTER button and the UP, DOWN, LEFT, and RIGHT buttons to
specify the size of the area and to position the area. Press the
ENTER button again to exit the AREA setting menu. You can use
the SENSITIVITY option to set the motion detection sensitivity.
The higher the setting, the more sensitive the motion detection.
SIZE
LOCATION
CAMERA ID OFF
IRIS ALC...
SHUTTER OFF
AGC LOW
WHITE BAL ATW1
FOCUS MODE AF
MOTION DET ON...
COLOR/BW COLOR
PRIVACY ...
SPECIAL ...
PRESET ...
EXIT QUIT
(MOTION DET)
AREA PRESET...
SENSITIVITY L---I---H
RET
(MOTION DET)
AREA USER...
SENSITIVITY L---I---H
RET
Press the
ENTER
button.
Press the
ENTER
button.