Filter
Top Products
30
E
29
❖ HOME RETURN automatically returns to the HOME
position should there is no key input for a certain time.
The HOME position is set to PRESET 0 if it is saved or
Off if not.
HOME RETURN Time Setup
OFF ➞ 1MIN ➞ 2MIN ➞ 3~60MIN ➞ 2 HOUR ➞ 3~12 HOUR
➞
PRESET NO. 0
POSITION SET ...
PRESET ID OFF
EXIT QUIT
(PRESET MAP)
0 H 1 2 3 4
56789
10 11 12 13 14
15 16 17 18 19
20 21 22 23 24
25 26 27 28 29
30 31 RET
HOME RETURN OFF
EXIT QUIT
❙
PRESET
Select the PRESET menu and press [ENTER] and the
PRESET MAP submenu screen will appear.
Select the PRESET number and press [ENTER] and the
above screen will appear.
✔
POSITION SET :
Memorizes the position of ZOOM or
FOCUS.
✔
PRESET ID :
Designates the ID on the basis of the
PRESET position as the CAMERA ID.
Press the
ENTER
button.
(RS-485)
PROTOCOL SAMSUNG
BAUD RATE 9600
ADDRESS 0
RET
✔
DETAIL :
Controls the horizontal or vertical distinction.
✔
V-SYNC :
INT shall be selected to use internal
synchronization. LINE... is used to synchronize several
camera phases for the multi camera operation by using an
external signal(AC signal). As there may be a slight
deviation between sets, adjusts PHASE to overcome this
handicap. When you use AC power source, V-SYNC is
available. Select LINE... and press [ENTER] and the
PHASE control submenu will appear. The PHASE control
ranges from -106H to +106H as for NTSC and from -138H
to +138H as for PAL.
Press the
ENTER
button.
❖ In case of DC power source, the V-SYNC menu is
marked --- so that setup is unavailable.
✔
RS-485 :
Sets up RS-485 Communication Protocol, Address,
and Baud Rate.
(SPECIAL)
LANGUAGE ENGLISH
CTRL TYPE A
POSI/NEGA +
D-ZOOM 1
DIS OFF
DIGITAL ZOOM OFF
REVERSE OFF
RS-485 OFF
DETAIL (1)-I--
V-SYNC INT
RET
(SPECIAL)
LANGUAGE ENGLISH
CTRL TYPE A
POSI/NEGA +
D-ZOOM 1
DIS OFF
DIGITAL ZOOM OFF
REVERSE OFF
RS-485 OFF
DETAIL (1)-I--
V-SYNC INT
RET
(LINE LOCK)
PHASE (000) ----I----
RET
Press the
ENTER
button.