Filter
Top Products
27
28
5. Align the SAMSUNG logo on the Housing and the FRONT label of the Holder Housing so
that they face the same direction, and insert the � Guides of the Housing into the Guide Hole
of the Holder Housing. Turn the Housing counter clockwise by approximately 20 degrees.
Finally, fasten the � screws (M4xL10).
- Make sure not to let the Gasket loose from the Housing.
(If the Gasket is loose, the product is not properly waterproof.)
HOLDER HOUSING
HOLDER HOUSING
HOUSING
HOUSING
HOUSING
GUIDE
SCREW
GUIDE HOLE
GASKET
SCREW
GUIDE HOLE
GUIDE
"A"
"B"
SCC-C7433_7435-Eng.indd27 2008-05-20오전10:49:43