Filter
Top Products
53
54
DNR
DNR(Digital Noise Reduction) function enables the picture to be reduced noise.
FLICKERLESS
When this is set to [ON], the shutter speed is set to 1/100 sec (for NTSC) or 1/120 sec (for PAL)
to prevent from ickering by the discordance between vertical synchronization frequency and
on-and-off frequency of the light.
REVERSE
It is used to mirror video signals horizontally, vertically, or both.
DETAIL
It is used to control the horizontal or vertical distinction.
Y-LEVEL
It is used to set the levels for the Sync signal and the entire brightness signal of the video
signal.
(SPECIAL)
DNR ON
FLICKERLESS OFF
REVERSE OFF
DETAIL (2)
--
I
-
Y-LEVEL (0) I
--------
C-LEVEL (0) I
--------
POSI/NEGA +
RET
SCC-C7433_7435-Eng.indd53 2008-05-20오전10:49:48