Basic Recording
✤ The EASY.Q mode works only in Camera mode.
✤
The EASY.Q mode allows a beginner to easily make good recordings.
1. Set the Power switch to CAMERA.
2. Set the Mode switch to TAPE.
(SC-D353/D354/D355 only)
3. By pressing the EASY.Q button, all functions on the
Camcorder will be set to off and the recording
settings will be set to the following basic modes:
■ Battery level, recording mode, counter, date/time,
and DIS ( ) will be displayed.
■ The word EASY.Q will appear on the LCD
screen at the same time. However, the
Date/Time will only be seen if it has been
previously set. (see page 33)
4. Press the Start/Stop button to start recording.
Recording will begin using the basic automatic
settings.
5. Press the EASY.Q button again in the STBY mode
and then turn the EASY.Q mode off.
■ The EASY.Q function will not turn off while you
are recording.
■ The camcorder will return to the settings that
were set prior to activating EASY.Q mode.
[ Notes ]
■ In EASY.Q mode, certain functions are not available,
such as Menu, BLC, Manual focus.
If you want to use these functions, you must first
turn the EASY.Q mode off.
■ The EASY.Q mode settings are deleted when the Battery pack is
removed from the Camcorder and must be reset when the Battery
pack is replaced.
■ EASY.Q mode will not turn off during a recording.
■ Taking a photo image using the PHOTO button while EASY.Q is
set releases DIS function.
■ Digital Zoom, COLOR NITE SHUTTER or Digital Effect is not
available in the EASY.Q mode.
Using EASY.Q Mode (for Beginners)
✤ Camera EASY. Q( )
✤ EASY. Q(
)
1.
CAMERA
( )
2. Mode TAPE( )
( SC-D353/D354/D355).
3. EASY. Q( ) ,
OFF( ),
:
■ , ,
,
/
Date/Time,DIS( )
■ "EASY.Q"
,
Date/Time( / )
, /
( 33 )
4.
Start/Stop
( )
■
5. STBY( ) EASY. Q( )
,
■ EASY. Q
■
■
EASY. Q
( )
, , MENU
,BLC ,MF
, EASY. Q(
)
■ ,
EASY. Q
( )
, ,
■
EASY. Q
■ EASY.Q PHOTO
■ EASY.Q ,
EASY. Q
(
)
( )
4040
ENGLISH
60min
0:00:10
SP
STBY
3
1
√