Samsung SCD-5083 Security Camera User Manual


 
30_ camera operation
camera operation
MOTION : This product
generates signals
each time an object
movement is detected
in the four areas of
the screen so efficient
monitoring can be
achieved.
DET. SIZE : Selects an object size to detect on the screen.
DET. AREA : Set the areas of
motion detection.
SEL AREA : Select from four
areas that users
want.
MODE : Determine whether to
use the selected area.
SENSITIVITY : Set the
sensitivity of
the motion
detection.
When you adjust the higher level, the more sensitive.
TOP/BOTTOM/LEFT/RIGHT : Area location can be adjusted.
RETURN : Return to the MOTION DET menu.
NON DET. AREA : Specify a detection exception area to mask.Select a
mask area number and specify the size and position.
SEL AREA : You can select up to 4 areas.
MODE : Determines whether to use the area selected in the AREA.
TOP/BOTTOM/LEFT/RIGHT : Adjust the size and position of the selected area.
RETURN : Return to the MOTION DET menu.
INDICATOR : If an object moves in a pattern set by the user, it will be
displayed on the screen as a box.
ALARM OUT : When object movement is detected, the detection signal will
be outputted.
EXTERNAL : Send signals through external terminals.
OSD : Display signals on the screen.
RETURN : Return to the MOTION DET menu.
RETURN : Return to the VIDEO ANALYTICS menu.
-
MOTION DET
1.
DET. SIZE
2.
DET. AREA
3.
NON DET. AREA
4.
INDICATOR
OFF
5.
ALARM OUT
6.
RETURN
MOTION DETECT AREA
1.
SEL AREA
AREA1
2.
MODE
ON
3.
SENSITIVITY
----
----
5
4.
TOP
--------
1
5.
BOTTOM
--------
100
6.
LEFT
--------
1
7.
RIGHT
--------
100
8.
RETURN