Filter
Top Products
68
ENGLISH
IEEE 1394 Data Transfer
●
System requirements
■
CPU : faster Intel
®
Pentium III
TM
450Mhz compatible
■
Operating system: Windows
®
98SE, ME, XP, Mac OS
■
Main memory: more than 64 MB RAM
■
IEEE1394 add-on card or built in IEEE1394 card
Recording with DV connecting cable
1. Set the power switch to PLAYER mode.
2. Connect the DV cable (not supplied) to the DV IN/OUT port of camcorder and
to the DV IN/OUT port of the other DV device.
■
Make sure DV IN appears on the monitor.
3. Press the START/STOP button to enter the REC PAUSE mode.
■
PAUSE is displayed in the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
■
If you want to pause recording for a while, press the START/STOP button again.
6. To stop recording, press the (STOP) button.
Note
■
When making recordings on the camcorder, the pictures on the LCD or a TV monitor may occasionally be uneven,
however recorded pictures are not affected.
6Pin 4Pin
(Not Supplied)
DV port linking diagram
(Not Supplied)IN/OUT