Filter
Top Products
69
ENGLISH
✤
At the end of a recording you must remove the power source.
✤
Leaving the battery pack on the camcorder after completing recording can reduce the life span of the battery.
After completing a recording session
1. Slide the EJECT switch in the direction of the arrow
■
Opening the cassette door ejects the tape automatically.
■
Wait until the tape is completely ejected.
2. After removing the tape, close the door and store the camcorder in a dust free environment.
■
Dust and other foreign materials can cause image degradation.
3. Set the power switch to OFF mode.
4. Disconnect the power source or remove the Lithium Ion Battery Pack.
■
When connecting a power supply, separate it in reverse order by referring to page 21.
■
Hold down the BATT. RELEASE button and slide the battery pack in the direction of the arrow.
Maintenance
After finishing a recording
1
2
3
4
4
OFF