Filter
Top Products
ENGLISH
Advanced Recording
4747
●
EIS (Electronic Image Stabilizer)
✤ The EIS function works in CAMERA/M.REC mode only.
✤ EIS(Electronic Image Stabilizer) is a function that compensates for any shaking or hand movement while holding the
camcorder (within reasonable limits).
✤ It provides more stable pictures when:
■
Recording a small object close-up
■
Recording and walking at the same time
■
Recording through the window of a vehicle
1. Set the camcorder to CAMERA mode.
2. Press the MENU button.
■
The menu list will appear.
3. Turn the MENU DIAL highlight to CAMERA and press the ENTER button.
■
The sub menu list will appear.
4. Turn the MENU DIAL to activate the EIS function, press the ENTER button.
■
The EIS menu is changed to ON.
■
If you do not want to use the EIS function, set the EIS menu to OFF.
5. To exit, press the MENU button.
Notes
■
It is recommended that you deactivate the shake compensation function when using a tripod.
CAM MODE
INITIAL
PROGRAM AE
WHT. BALANCE
D.ZOOM
EIS
DSE SELECT
FLASH SELECT
CAMERA
A/V
MEMORY
VIEWER
CUSTOM
CAM MODE
PROGRAM AE
WHT. BALANCE
D. ZOOM
EIS
DSE SELECT
CUSTOM
CAMERA SET
00516B SCD86/D87-SEA (28~61) 2/10/03 4:39 PM Page 47