Filter
Top Products
ENGLISH
5151
Advanced Recording
●
CUSTOM.Q
✤ You can customize settings and save them for future use.
■
The CUSTOM.Q function operates in the CAMERA and M.REC mode.
✤ If you want to use the CUSTOM.Q function (see page 61) correctly, set the status of each item as desired before using
the CUSTOM.Q function.
✤ You can set and store the following items:
■
PROGRAM AE, WHT.BALANCE, D.ZOOM, EIS, DSE SELECT
1. Set the power switch to CAMERA mode.
2. Press the MENU button.
■
The MENU list will appear.
3. Turn the MENU DIAL, select CAMERA position and press the ENTER button.
4. Select CUSTOM.Q using MENU DIAL in the submenu and press the ENTER button.
5. Using the MENU DIAL and press the ENTER button, set the status of each item as desired.
6. To exit the menu, press the MENU button.
Notes
■
If you want to activate the CUSTOM.Q function, press the CUSTOM.Q button while
in CAMERA mode.
■
The PROGRAM AE mode is automatically setup when the EXPOSURE is set on manual.
CAM MODE
PROGRAM AE
WHT BALANCE
D ZOOM
EIS
DSE SELECT
CUSTOM
CAMERA SET
CAM MODE
INITIAL
PROGRAM AE
WHT. BALANCE
D.ZOOM
EIS
DSE SELECT
FLASH SELECT
CAMERA
A/V
MEMORY
VIEWER
CUSTOM
CAM MODE
CUSTOM
CAMERA SET
PROGRAM AE
WHT. BALANCE
D. ZOOM
EIS
DSE SELECT
00516B SCD86/D87-SEA (28~61) 2/10/03 4:39 PM Page 51