Samsung SCD86/D87 Camcorder User Manual


 
ENGLISH
8383
Digital Still Camera mode
Inserting and ejecting the Memory Stick
Inserting the card
1. Turn the Power switch to OFF.
2. Insert the Memory Stick into the CARD slot located beneath the camcorder, in the
direction of the arrow.
Ejecting the card
1. Turn the Power switch to OFF.
2. Push the Memory Stick, then it comes out of the camcorder automatically.
3. Pull out the Memory Stick.
Notes
If you turn the power switch to M.PLAY, the last recorded image appears.
- If there are no recorded images on the Memory Stick, NO STORED IMAGE!
and will display on the screen.
Do not turn the power off while recording, loading, erasing or formatting.
Please turn the power off before you insert or eject the Memory Stick.
You could lose data on the Memory Stick.
Do not allow metal substances to come in contact with the terminals of the Card.
Do not bend the Card.
After pulling the card out from the camcorder, please keep the Memory Stick in a soft case to prevent static shock.
The stored contents may be changed or lost as a result of misuse, static electricity, electric noise or repair.
Save important images separately.
Samsung is not responsible for data loss due to misuse.
If the USB cable is connected to the camcorder, the (DELETE), (S.SHOW), (FWD), (REV) buttons
are not available in M.PLAY mode.
00516B SCD86/D87-SEA (62~97) 2/10/03 4:41 PM Page 83