Filter
Top Products
Operating Your Camera
COLOR CCD CAMERA User’s Manual
25
COLOR CCD CAMERA User’s Manual
24
3. Press SET button.
4. You can enter up to 16 characters.
Move the cursor to character-enter location by using the LEFT or
RIGHT button.
Select the desired character by using UP or DOWN button.
•The factory defualt characters are A, B, ···, a, b, ···, ., -, ··· 0, 1···, 8, 9
Press the SET button to confirm the blinking character. The first
character is saved and the cursor in the bottom of the screen moves to
the next position.
Repeats steps
,
and until you create the full name you want.
Camera ID
POS CLR RESET END
• If you make a mistake while entering name
Move the cursor to ‘Clr’, press ‘SET’ button.
After erasing the character from right to left, correct the character again.
Notes
Camera ID
POS CLR RESET END
5. Select the position at which the camera ID will be located on the screen.
Move the cursor to 'Pos' and press SET button.
T
he camera ID is displayed on the bottom-right of the monitor screen.
(Default position)
Select the position by using the 4-directional buttons, then press the SET button to
confirm the position.
6. When completed, move the cursor to 'End' and press SET button.
Camera ID
POS CLR RESET END