Filter
Top Products
COLOR CCD CAMERA User’s Manual
29
COLOR CCD CAMERA User’s Manual
28
SETUP
CAMERA ID OFF
BACKLIGHT OFF
WHITE BAL. ATW
MOTION DET. OFF
LENS DC
SHUTTER MANUAL
SETUP
CAMERA ID OFF
BACKLIGHT OFF
WHITE BAL. ATW
MOTION DET. OFF
LENS DC
SHUTTER MANUAL
AGC HIGH
SENS-UP OFF
DC/Video: Used to choose DC or VIDEO according to the type of Auto Iris Lens.
3. Press the Set button to go back to the previous menu.
Instruction: Camera Operation
This feature controls the brightness of the screen.
1. After the Setup menu is displayed, press the Up/Down buttons to move the arrow to “Lens.”
2. The lens selected with the Auto Iris lens selection switch will be displayed. (See picture on p.13)
Lens Selection
Select either auto or manual shutter control
1. After the Setup menu is displayed, press the Up/Down buttons to move the arrow to “Shutter.”
2. Press the Left/Right buttons to select a Shutter mode.
A.FLK : Select this mode if screen flickering occurs due to a conflict between the
illumination and the frequency
Manual :Select this mode for manual shutter control
Shutter
• When using a Video type auto iris lens
Properly adjust the ALC control port on the lens: the usual setting is Av.
Depending on the lens type being used, it may not operate properly in AV
mode. If the lens does not adjust correctly, set
it to PEAK and adjust it by turning the LEVEL
adjustment lever in the “L” direction little by
little, away from the middle position.
If the right level of light cannot be obtained, or
if the screen’s brightness fluctuates, place the
cursor on Video Level Search and press the
Set button. Press End when you find the right brightness.
If the right level of light cannot be obtained and the lens is still fluctuating,
point the camera towards a darker area and repeat step .
To control the brightness, increase/decrease the Brightness value.
To control the diaphragm, increase/decrease the V-Level value.
Caution
• If an auto iris lens is used, the lens selection switch on the side of the product
must be set either to DC or to Video accordingly. (See picture on p.15)
• The brightness may be adjusted if a DC/Video lens is used; the adjustment range
is 1~100. Adjust to the optimum screen brightness.
• Some lenses may not work correctly in certain brightness levels.
Caution
3. Manual mode enables manual shutter control
• The shutter speed can be from 1/60 sec. to 1/2000 sec. (x2~x128 Sens-up can be
operated manually.)
4. Press the Set button when done.