Filter
Top Products
93
connecting to a TV
VIDEOAUDIO
LR
VIDEOAUDIO
Red
Yellow
White
White
Yellow
Stereo Type
Monaural Type
W
T
ON
OFF
MODE
ON
OFF
W
T
ON
OFF
MODE
VIDEO
AUDIO
L
R
VIEW
W
T
CARD
VIDEO
AUDIO
L
R
Normal TV
Camcorder
Signal fl ow
Audio/Video cable
Use the provided Audio/Video cable to connect the camcorder to a TV as follows:
1. Connect the provided Audio/Video cable to the Audio/Video jack on the TV.
2. Turn on your TV and set the TV’s input selector to the Input your camcorder is connected to.
• Refer to the TV’s instruction manual to see how to select the TV input.
• If only a mono audio input is available on the TV
set, use the white plug (audio L) on the audio
cable.
• Do not use excessive force when connecting the
cables.
• It is recommended to use the AC power adaptor
as the power source.
• Before connecting, make sure that the volume on
the TV is turned down: forgetting this may cause
feedback from the TV speakers.
• Carefully connect the input and output cables to
the corresponding connections on the device the
camcorder is being used with.
You can view the recorded videos and photos on a large screen by connecting the camcorder
to a TV.
CONNECTING TO A NORMAL (STANDARD DEFINITION) TV (16:9/4:3)
To playback your recordings, the television must be NT-compatible. We recommend that you
use the AC power adaptor as a power source for the camcorder. Check your TV's input jacks
and select appropriate connection method according to the jack type. For details, refer to your
TV user manual.