Filter
Top Products
English _29
●
NETWORK CONNECTION AND SETUP
PORT RANGE FORWARD (PORT MAPPING) SETUP
If you have installed a Broadband Router with a camera connected, you must set the port range
forwarding on the Broadband Router so that a remote PC can access the camera in it.
Manual Port Range Forwarding
1. From the Setup menu of the Broadband
Router, select <Applications &
Gaming> - <Port Range Forward>.
For setting the port range forward for
a third-party Broadband Router, refer
to the user guide of that Broadband
Router.
2. Select <TCP> and <UDP Port>
for each connected camera to the
Broadband Router.
Each port number for the Broadband
Router should match that specified in
<Network> - <Port> from the
camera's Setup menu.
3. When done, click [Save Settings].
Your settings will be saved.
M
Above sample instructions are based on the CISCO’s Broadband Router (Model: LINKSYS).
The settings may differ depending on the connected Broadband Router model.
For more information, refer to the user manual of the applicable router.