Samsung SNB-5001 Security Camera User Manual


 
Alarm input
You can set the alarm input type, activation time, and operation mode.
1. From the Setup menu, select the
<Event (
)> tab.
2. Click <
Event setup >.
3. Select <Alarm input> from <Event
action setup>.
4. Set whether or not to <Enable>.
5. Specify an input device.
Type
- Normal
open : It is normally open,
but if it is closed, an alarm will be
triggered.
- Normal
close : It is normally closed,
but if it is open, an alarm will be triggered.
6. Specify the <Activation time>.
Always : Always check if an alarm occurs. It activates in operated mode when the
alarm occurs.
If set to Always, the activation time cannot be changed.
Only scheduled time : Check if an alarm occurs at a specified day of the week for
a specified time period. It activates in operated mode when the alarm occurs.
[Clear ( )] : Deselect the selected times.
7. Specify an operation that will perform if an alarm occurs.
FTP : Specify the use of FTP transfer in the alarm input setup.
E-mail : Specify the use of email transfer in the alarm input setup.
8. When done, click [Apply (
)].
English _57
SETUP SCREEN