Filter
Top Products
14_ installation & connection
MOUNTING THE LENS
Disconnect the power before proceeding.
M
The C lens and CS lens are not included in the product package.
Mounting the lens onto the C/CS mount camera
1. Fit the lens into the mounting screw hole and turn it clockwise. Tighten the screw.
Then, it rotates in SLIP mode.
2. Turn it clockwise until it contacts on the stopper and stops.
3. As you can turn it counter clockwise from the stop point to rotate it in Slip mode,
adjust the angle to your preference within the range.
4. Connect the lens cable to the camera connector.
installation & connection
C/CS Lens