Samsung SOC-4160 Camera Lens User Manual


 
COLOR CCD CAMERA User Guide
32
COLOR CCD CAMERA User Guide
33
Troubleshooting
If there are problems in operation, please refer to the items below. If the
problem persists, please contact the agent you purchased this product from.
Nothing appears on the screen.
Check that the power cord and line connection between the camera and monitor are
fixed properly.
Check that you have properly connected UTP cable or BNC cable to the camera.
The image on the screen is dim.
Is lens stained with dirt? Clean your lens with soft, clean cloth.
Set the monitor to proper condition.
If the camera is exposed to too strong light, change the camera position.
The image on the screen is dark.
Adjust the contrast feature of the monitor.
If you have an intermediate device, set the 75Ω / Hi-z properly.
The camera is not working properly, and the surface of the camera is hot.
Check that you have properly connected the camera to an appropriate power source.
The SENS-UP function does not work.
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or ‘MANUAL’.
The Motion Detection function does not work.
Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.
Color is not correct.
Check the setting of WHITE BAL SETUP menu.
The screen flickers continually.
Check that direction of camera turns toward the Sun.
When coaxial communication is not available:
Make sure that the camera and monitor are installed within the recommended distance.
Use the video amplifier equivalent to coaxitron if the recommended installation distance is
exceeded.
When the camera is not waterproof.
Please check the Front Cover and Main Body by the following Guide Label.
Specifications
The specification for this product may change without prior notice for product improvement.
SOC-4160N
SOC-4160P
ELECTRICAL
Input Voltage DC 12V / AC 24V
Power Consumption MAX 2.7W / 3.8W
VIDEO
Imaging Device 1/3 inch, Diagonal 6mm Super HAD CCD
Total Pixels 811(H) x 508(V) 795(H) x 596(V)
Effective Pixels 768(H) x 494(V) 752(H) x 582(V)
Scanning System 2:1 Interlace
Synchronization Internal /Line-Lock
Frequency H : 15.734KHz V:59.94Hz H: 15.625KHz V: 50.00Hz
Horizontal Resolution
COLOR : 600TVL, B/W : 700TVL
Min. Illumination
COLOR : 0.15Lux (50IRE, @F1.2), 0.0003Lux (SENE-UP, x512)
B/W : 0.001Lux (50IRE, @F1.2), 0.000002Lux (SENS-UP, x512)
S/N (Y Signal) 52dB (Weight On, AGC Off)
Video Output CVBS : 1.0Vp-p, 75Ω composite
LENS
Zoom Ratio 3.6x (Manual)
Focus Length 2.8 ~ 10.0mm (F1.2)
Angular Field of View H : 94.4°(Wide)~28°(Tele) / V : 69.2°(Wide)~21°(Tele)
OPERA TIONAL
Electronic Shutter Speed 1/60 ~ 1/120k sec 1/50 ~ 1/120k sec
On Screen Display
NTSC : 7 Languages, PAL : 15 Languages
SSDR On / Off (Level adjustable)
Backlight Compensation BLC / HLC / OFF
Day & Night COLOR / B/W / AUTO (ICR)
Gain Control Low / High / Off
White Balance ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)
SENS-UP (frame Integration) Auto / Off (Selectable x2 ~ x512)
Motion Detection On / Off (8 Programmable zones)
Privacy Masking On / Off (12 Programmable zones)
3D Noise Filter (SSNRIII) On / Off (Level adjustable)
Digital Zoom On / Off (x1 ~ x16)
Digital Image Stabilization(DIS) On / Off
Camera Title On / Off (Displayed 15 Characters)
Sharpness On / Off (Level adjustable)
Flip / Mirror On / Off
Communication Coaxial, RS-485
Protocol
Coaxial(Pelco), RS-485(STW(SPD), PELCO-P, PELCO-D, VICON, PANASONIC,
BOSCH, HONEYWELL, SEC)
ENVIRONMENTAL
Operating Temperature / Humidity -10°C ~ +50°C / 30% ~ 80% RH
Storage Temperature / Humidity -20°C ~ +60°C / 20% ~ 90% RH
MECHANICAL
Water Resistance IP66
Dimension Ø77mm(W) x 216mm(H) (BRACKET ANGLE 90°), 284mm (BRACKET ANGLE 180°)
Weight 955g