Filter
Top Products
Shooting options
51
Shooting in the dark
Adjusting the ISO speed
The ISO speed is the measure of a film’s sensitivity to light as
defined by the International Organization for Standardization (ISO).
The higher ISO speed you select, the more sensitive to light your
camera becomes. With a higher ISO speed, you can get a better
photo without using the flash.
In Shooting mode, select
1
f
.
Select an option.
2
Select
•
to use an appropriate ISO speed based on the
brightness of the subject and lighting.
Auto
The higher ISO speed you select, the more image noise you may get.
p
Option Description
Red-eye*:
The flash fires when the subject or background is
•
dark.
The camera reduces red-eyes.
•
Fill in:
The flash always fires.
•
Light intensity is adjusted automatically.
•
Slow Sync:
The flash fires and the shutter stays open longer.
•
Select this when you want to capture ambient light
•
to reveal more details in the background.
Use a tripod to prevent your photos from blurring.
•
Red-eye Fix*:
The flash fires when the subject or background is
•
dark.
The camera corrects red-eyes through its advanced
•
software analysis.
The options may differ depending on the shooting mode.
* There is an interval between two bursts of the flash. Do not move until
the flash fires a second time.
Flash options are not available if you set burst options or select
•
Blink
Detection.
Make sure that your subjects are within the recommended distance
•
from the flash. (p. 113)
If there is reflected light or much dust in the air, tiny spots may appear
•
on your photo.