Filter
Top Products
ENGLISH
119119
Maintenance
✤ At the end of a recording you should remove the power source.
✤ When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span of the battery.
Therefore, it should be removed from the camcorder.
1. Slide the TAPE OPEN/EJECT switch in the direction of the arrow.
■
Opening the cassette door ejects the tape automatically.
■
Please wait for the tape to be completely ejected.
2. After removing the tape, close the door and store the camcorder in a dust free
environment.
■
Dust and other foreign materials can cause square-shaped noise or jerky images.
3. Set the power switch to OFF.
4. Disconnect the power source or remove the Lithium Ion Battery Pack.
■
Hold down the BATTERY RELEASE button and slide the battery pack
in the direction of the arrow.
After Finishing a Recording
FADE
S
.SHOW
BLC
TAPE
MEMORY
P
LAY
REC
O
F
F
1
2
00655E VP-D5000 UK (110~129) 8/18/03 1:01 PM Page 119