Filter
Top Products
English_77
Format
The format function completely deletes all files and options on the storage media, including protected files.
You can format (initialize) recording data in the storage media. You have to format the pre-used storage media or
newly purchased memory cards with this memory camcorder before using them. This enables stable speeds and
operation when accessing the recording medium.
Be aware that all files and data including protected files will be erased.
settings contents
on-screen
display
"Memory" Formats the built-in storage media. (VP-MX20C/MX20CH only) None
"Card" Formats the memory card. None
File No.
File numbers are assigned to recorded files in the order they were recorded.
settings contents
on-screen
display
"Series"
Assigns file numbers in sequence even if the memory card is replaced with another one
or after formatting, or after deleting all files. The file number is reset when a new folder is
created.
"Reset"
Resets the file number to 0001 even after formatting, deleting all files or inserting a new
memory card.
When you set "File No." to "Series", each file is assigned with a different number so as to avoid duplicating file
names. It is convenient when you want to manage your files on a PC.
Do not remove the recording medium or perform any other operation (such as turning off the power) during
format. Also, be sure to use the provided AC power adaptor, as the recording medium may be corrupted if
the battery becomes exhausted during format. If the recording medium becomes corrupted, format it again.
A memory card with the protection tab set to lock will not be formatted.
²
page 39
If there is no storage media inserted, it can not be selected. Then it will be dimmed on the menu.
In case of model
VP-MX20/MX20H/MX20L/MX20R,
the format is executed by selecting "OK".
•
•
•
•
Do not format the recording medium on the PC or a different device.
Make sure to format the recording medium on the memory camcorder.
WARNING