Filter
Top Products
English_84
connecting to a PC
+
This chapter explains how to connect a PC using the USB cable for various actions.
- To connect an USB cable to a PC, refer to the software installation instructions and available PC specification.
TRANSFERRING A RECORDED FILE THROUGH A USB CONNECTION
The camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification)
You can transfer a recorded file on a storage media to your PC via a USB connection.
USB Connection Speed depending on the System
High speed USB connection is supported by Microsoft (Windows) device drivers only.
Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.
Windows XP - High speed USB on a system with Service Pack 1 or later installed.
Windows VISTA - High speed USB on a system with Service Pack 1 or later installed.
Cyberlink MediaShow4
System Requirements
The following requirements must be satisfied to use CyberLink MediaShow4.
CPU
Intel
®
Pentium
®
4, at least 3.0 GHz/AMD recommended
OS
(Operating System)
Windows Vista or XP (Windows XP Service Pack 2)
* Standard installation is recommended.
Operation may not assured if the above OS has been upgraded.
RAM
512MB (1 GB and above recommended)
Resolution
800 x 600, 16-bit colour or higher
USB
USB2.0 High Speed
VGA
Intel 945GM or faster
NVIDIA Geforce 6600 or higher
ATI Radeon X1600 or higher
- On a low performance graphics system, running the MediaShow4 may cause error or not apply some of
animation effects.
Miscellaneous
Internet Explorer 5.5 or later DirectX 9.0 or later
Supported media
DVD+R/RW, DVD-R/RW
For the compatible DVD/CD burners, refer to CyberLink web site:
http://www.gocyberlink.com/english/products/powerproducer/2_gold/comp_dvd_drives.jsp
•
•
•
•
•
•