Filter
Top Products
Advanced Shooting
EASY Mode (for Beginners)
31
ENGLISH
✤ Even a beginner can easily make a recording using the EASY mode.
■ The EASY mode only operates in CAMERA mode.
1. Set the power switch to CAMERA mode.
2. By pressing the EASY button, all the functions of the camera
will be set to off and the recording settings will be set to the
following basic mode.
■ Battery level, recording mode, counter, date/time,
DIS ( ) will be displayed as the camcorder starts to run.
■ The word “EASY” will appear in the Viewfinder
at the same time.
However, the Date/Time will only be seen if it has been
previously set.
(DIS ( ) will be displayed on VP-W63 only)
3. Press the START/STOP button to start recording.
■ Recording will begin using the basic automatic environment settings.
4. Pressing the EASY button again turns the EASY mode off.
■ The camera will return to the settings that were set prior to
the EASY mode being switched on.
Notes:
■ In the EASY mode, the MENU, MF, DSE, P.AE, BLC and FADE functions are not available.
■ If you want to use these functions, you must first switch the EASY mode off.
■ The EASY settings will be stored in the camera (providing a good lithium battery
has been installed).
STBY
X:XX:XX
EASY
31. JAN. 2001