Filter
Top Products
54
ENGLISH
Maintenance
Cleaning the Video Heads
✤ To ensure normal recording and clear pictures, clean the video heads.
✤ When the playback pictures are noisy or hardly visible, the video heads may be dirty.
a. Normal Picture
b, c. Noisy Picture
If this happens, clean the video heads
with a dry type cassette cleaner.
1. Set the power switch to PLAYER mode.
2. Insert the cleaning tape.
3. Press the (PLAY/STILL) button.
4. Press the
■ (STOP) button after about 30 seconds.
Check the quality of the picture using a known good video cassette.
If it is still bad, repeat the operation.
If the problem continues, contact your local authorized service centre.
Storing the Camcorder
1. You must detach the BATTERY PACK from
the camcorder when not in use.
2. Keep the camcorder in a ventilated,
dry/warm place.
3. Store the camcorder were temperature
changes will be minimal. (avoid places such
as a garage, loft space or car.)
4. Store the camcorder on a stable surface.
21
4
3
abc