Filter
Top Products
56
ENGLISH
Troubleshooting Check
Troubleshooting Check
✤ Before contacting a service centre, perform the following simple checks.
They might save you the time and the expense of an unnecessary call.
Self Diagnosis Display
Display Blinking Inform that... Action
slow the battery pack is almost Exchange it with a charged
discharged. one.
fast the battery pack is fully Exchange it with a charged
discharged. battery.
TAPE END slow the tape has almost reached Prepare a new one.
its end.
TAPE END no the tape reached its end. Change to a new one.
TAPE slow there is no tape in the camcorder. Insert a tape.
TAPE slow the tape is protected Check the red tab,
from recording. on the tape.
D.EMG slow the camcorder has some 1. Eject the tape.
C.EMG mechanical fault. 2. Set to OFF
R.EMG 3. Detach the battery.
L.EMG 4. Reattach the battery.
* Please contact your local service
center if the problem continues.
DEW slow moisture condensation see page 59.
has formed in the camcorder.