Filter
Top Products
English 10
For Windows XP/Vista users
Mounting your camera
1 Set the camera to the card reader mode (page 8).
h The card is recognized (mounted) as a disk, and the [XACTI (E:)] (or
[XACTI_INT (E:)] in case of the camera’s internal memory) window
opens.
* The drive name (E:) may be different on your computer.
2 Select an action.
h Select the desired procedure from the [XACTI (E:)] (or [XACTI_INT
(E:)] in case of the camera’s internal memory) window.
Dismounting the camera
CAUTION
iTo disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
loss of card data.
1 Left-click on the icon for safely removing hardware.
h A list appears showing the devices connected to the computer’s USB
connector.
<Windows Vista >
h Close the window.
2 Left-click on the camera drive (E:).
h The camera can now be disconnected.
* The drive name (E:) may be different on your computer.