Filter
Top Products
English 20
Saving the computer screen image in your
camera
1 Run Screen Capture.
h Screen Capture is automatically launched when you start your
computer.
<To quit Screen Capture>
h Right-click on [Xacti Screen Capture 1.1] in the task tray, and then left-
click on [Exit]. When the screen to confirm appears, left-click on [Yes].
h To launch Screen Capture again, click [Start]→[Programs]→[Xacti
Screen Capture 1.1].
2 On the computer’s monitor, display the window you wish to save.
h Make the window you wish to save the active (selected) window.
3 Press the [ ] button.
h The currently displayed active window is saved as a bitmap image in
the camera’s memory.
h When there is no active window, the entire screen display is saved.
h The saved data is stored in the \DCIM\***SANYO folder in the drive for
the camera.
h To exit Screen Capture, quit the application.
HINT
iTo use Screen Capture, only one camera should be connected to the
computer.
iThe maximum file size that can be saved for any one screen capture is
10 MB.
iWhen running Screen Capture, do not turn off the camera or remove the
card from the camera, as doing so may result in the loss of data. Also, do
not use the computer to process the data in the camera’s card or internal
memory, or the camera may not operate normally.