Filter
Top Products
SETTINGS
Control name Position
a
High speed electronic shutter switches (E.S.) All OFF:
1/50 sec
b
Electronic iris (EI)/Backlight compensation
(BLC) switch
OFF
c
Auto-iris lens switch (A.I. LENS)
Refer to page 5
DC
d
Lens iris level volume (LEVEL) about centre
High speed electronic shutter setting
Normally, the speed setting switches for the high speed electronic
shutter are all set to the OFF position. This sets the electronic shutter
speed to 1/50 sec. The switches can be set as indicated in table A to
select one of the 8 speeds available.
CAUTION:
• When using the high speed electronic shutter, the EI/BLC switch
must be set to the OFF position.
• Using the high speed electronic shutter indoors with low lighting,
will give darker pictures. In such a case, add some lights to make
sure the lighting is sufficient. If the lighting is very bright, pay
attention to the light angle in order to avoid or minimize the
smear phenomenon effect.
Table A
1
1/50
2
1/120
3
1/250
4
1/500
5
1/1000
6
1/2000
7
1/4000
8
1/10000
(Unit: sec.)
ON
OFF
ON
E. S.
BLC
L
E
V
E
L
DC
VIDEO
A. I.
LENS
LH
VR401
ON
123
EI
d
abc
ON
123
ON
123
ON
123
ON
123
ON
123
ON
123
ON
123
ON
123
L72H2/XE2 GB 1999, 3, 2
English 9