Filter
Top Products
4
English
PARTS NAMES
1 Shorter screws: M3 x 4
2 Longer screws: M3 x 6
3 Camera mounting
screw hole:
1/4"-20 UNC
1
2
3
4
1
Flange-back lock screw (LOCK)
2
Flange-back adjustment dial
3
Lens mount cap
The cap is installed to protect the lens mount section.
Remove the lens mount cap before installing a lens (sold separately).
4
Camera installation bracket
The bracket can be fixed at the top or bottom of the camera. When fixing the bracket, be sure to
use the longer screws and install the shorter screws on the opposite side to seal the openings.
CAUTION:
When installing the camera support, select a location that can support the total weight
of the camera and accessories.
L5AF2_US.book 4 ページ ２００２年１２月２０日 金曜日 午後１時４８分