Filter
Top Products
CONNECTIONS (VCC-6592P only)
Connections to the camera Y/C OUT connector
The peripheral devices (VCR, monitor, lens, etc.) and cables are
sold separately.
1 Using a coaxial cable (twin type, 75 ohms), connect the Y/C
OUT connector from the camera to the S-VIDEO input
terminal on the monitor or time lapse VCR.
2 Use a commercially available 12 V DC adaptor.
Connect an DC 12 V power source to the 12 V DC input terminal
on the back of the camera.
2A: When using this unit, the supplied clamping core (A or B) must be
installed on the power cord and BNC cable, in order to prevent
electromagnetic interference to the other devices connected.
3 The POWER indicator (A) will light. Adjust the picture on the
monitor using the Brightness and Contrast controls.
CAUTION:
• Please use a monitor with a Y/C or S-VIDEO input terminal, or a
time lapse VCR with a S-VIDEO input terminal.
• Use a Mini-DIN (round type, 4-pin) plug to connect to the Y/C
connector.
Never use a coaxial cable longer that 10 metres to connect the
camera to the S-VIDEO input terminal.
(Video signal connections)
: VIDEO IN
: VIDEO OUT
(A)
12 V DC connection
Push to insert the cable
12 V DC
–
+
2
12 V DC input
3
1
2A
2A
(A)
(B)
L53H2, H4/XE GB 2001, 9, 18
10 English