Sanyo VCC-HD5400P Digital Camera User Manual


 
14
Specifications
Camera
Image pickup device 1/2.5" CMOS sensor
Effective pixels 16:9 1920 (H) × 1080 (V), 4:3 1600 (H) × 1200 (V)
Lowest image
illumination
50IRE: 2.0 lx (F1.8, in color mode with high gain)
50IRE: 0.1 lx (F1.8 in black-and-white mode with high gain)
Video S/N ratio 50 dB or higher (when AGC is ‘OFF’)
Lens Focal Length: f=6.3 - 63 mm, F number: F1.8 - 2.5
Optical zoom 10x, electronic zoom 16x (up to 160x when used in
combination with the optical zoom)
Rotational scope Pan: 360° endless pan
Tilt: –20 to +200°
Rotation speed Pan: Max. 350°/sec
Tilt: Max. 350°/sec (0.1° - 120°/ sec for manual operation)
Preset position Max. 256
Auto mode Sequential, auto pan, tour, automatic return
Privacy mask ON/OFF, up to 32 positions
Motion sensor ON (detection area setting, video analytics)/OFF, face detection function
Auto pursuit ON/OFF
Sway compensation ON/OFF
Language selection English, French, German, Spanish, Japanese
For further details on the specifications of the camera, refer to the electronic manual.
I/O
Video output HD Output: HDMI terminal (TYPE C)
Monitor output: BNC terminal (MONITOR OUT)
LAN 10BASE-T/100BASE-TX (RJ-45 connector)
EX-HDD Connector For connecting an external hard disk drive case
SD Card Slot 1 (SDHC compliant, max. 32 GB supported)
Alarm input 4 (NO/NC), also used for switching between day and night modes
Alarm output 2 (NO/NC, 16V, 150 mA, open collector)
Audio input/output Audio input (white: 3.5-mm mini jack)
Audio output (black: 3.5-mm mini jack)
Communication method RS-485
Protocol SSP, PELCO-D
Baud Rate 2400, 4800, 9600, 19200
Address 1 - 255 (sanyo SSP: 1 to 127)
Recording media
SD memory card
External HDD
Normal recording, alarm recording, backup video recording in event of a
network failure, log information
For the recommended SD memory cards or hard disks, visit our website.
http://www.sanyosecurity.com/