Sanyo VCC-MD300P Security Camera User Manual


 
− 31 −
[8] Aperture
Emphasizes contours and increases the vividness of
the entire image.
[9] Motion Detection
The screen is divided into 48 areas (8 x 6) and
movement is detected from changes in brightness of
representative points within each area.
The detection status can be confirmed by enquiring
using the Status command.
In addition, the detection sensitivity can be adjusted
by configuring the following items.
Sensitivity (MOVE)
Sensitivity when determining movement can be
configured to a range of 1 to 10. 1 is the most
sensitive to movement.
Brightness Level (Y-LEVEL)
Settings for minimum brightness level when
determining movement (Valid for brightness above
the configured level)
The configuration range is 1 to 10. 1 is the most
sensitive to the minimum brightness level.
Brightness Difference (Y-Differ)
Settings for differences in brightness of the 2
images when determining movement (Invalid when
exceeding configured brightness differences)
The configuration range is 1 to 10. 1 is the most
sensitive to the difference in maximum brightness.
Time Interval (Duration)
Time interval settings when determining movement
The configuration range is 1 to 60. 1 is the most
sensitive to minimum time intervals.
Time intervals are divided into 5 fields.
Movement Assessment Confirmation Mode (TEST)
[10] Day/Night Switch Control
AUTO
Automatically switches the camera from color
images to black and white images depending on
the brightness of the day and night. The illumination
level at which the camera changes from color
images to black and white images can be set to
3 levels (MID, HIGH, LOW) or to manual (ADJ)
setting.
COLOR
Fixes the camera to color images.
B/W
Fixes the camera to black and white images.
Function Descriptions