Sanyo VPC-CG6 Camcorder User Manual


 
English 122
1 Date and time setting (page 30)
h
Set the camera’s internal clock.
2 Screen display (page 33)
h Specify whether the time/date
the image was captured is
displayed.
h Specify what information is
displayed on the Playback
Screen.
3 Startup display (page 123)
h Select the screen display that
appears when the camera is
turned on.
4 Operation sounds setting
(page 124)
h Select the operation sounds
that are produced when the
camera’s buttons are pressed,
and adjust the operation sound
volume.
5 Post-view (page 126)
h Specify how long the captured
image is displayed on the
monitor after the [ ] button is
pressed and released.
6 Wind noise reduction setting
(page 127)
h Set the wind noise reduction
function on or off.
7 Noise-reduction menu
(page 128)
h Set the noise-reduction function
on or off.
8 Image quality adjustment
(page 129)
h Adjust the image quality during
shooting.
9 Flicker-reduction menu
(page 130)
h Set the flicker-reduction
function on or off.
0 Digital zoom setting (page 131)
h Enable or disable the digital
zoom.
A Shortcuts (page 132)
h Assign functions to the SET
button operation when the
Shooting Screen is displayed.
B Monitor brightness (page 134)
h Adjust the brightness of the
monitor.
C Screen language (page 135)
h Select the language in which
the monitor messages are
displayed.
D TV system settings (page 136)
h
Select the type of video signal
that is output from the camera’s
AV terminal.
E Power save function (page 137)
F File number reset (page 139)
h Select the file number reset
function.
G Format (page 142)
h Reformat the camera’s internal
memory or the card installed in
the camera.
H Settings reset (page 144)
h Reset the camera to the
factory-preset settings.
I Remaining battery power
(page 146)
*Icons 7 through H are displayed when you toggle the SET button up or
down to scroll.