Filter
Top Products
English 46
HINT
What is the camera focusing on?
i
If the focus range (page 76) is set to a
setting other than manual
-
, a target
mark
&
on the monitor shows the area
the camera is focusing on.
i
The camera automatically determines the
correct focus by measuring from 9
different focus points within the shooting
area. If the target mark is at a position
that is different from the point you wish to
focus on, you can refocus, for example,
by changing the shooting angle.
iThe large target mark appears when
the camera focuses on a wide area in
the center of the screen.
About the focus indicator
i
A green focus indicator appears when
the subject is successfully focused, or a
red focus indicator when the camera
was not able to focus the subject.
The shutter speed and aperture are
displayed
i
When the camera focuses and the target
mark appears, at the same time, the
shutter speed and aperture settings are
also displayed. You can use them as a
reference when shooting.
If the camera shake icon > appears...
iDuring still image shooting, if the
shutter speed is slow and the
possibility that the image may be
blurred due to camera shake becomes
high, the camera shake icon may
appear on the monitor. In this case,
stabilize the camera when shooting, or
set the flash operation mode to
automatic (page 70).
iWhen shooting with the scene select
function set to the fireworks +
mode, the camera shake icon always
appears, but this is normal.
AF
F3.5
1/40
Shutter speed
Aperture
Target mark
Focus indicator
AF
F3.5
1/40
Camera shake icon