Sanyo VPC-CA8EX Camcorder User Manual


 
133 English
OPERATION SOUNDS
3 Press the [T/]] or [W/P] button to select the desired setting, and
press the SET button.
h The screen to select operation sounds appears.
<If “TURN ON/OFF” or “AUDIO GUIDE” is selected>
h The respective screen to enable or disable the sound appears.
h Press the [T/]] or [W/P] button to select the desired setting,
and press the SET button.
ON: Activates the sound.
OFF: Deactivates the sound.
<If “SHUTTER” or “KEY SW” is selected>
h The screen to select the operation sounds appears.
h Select from 8 different sounds (A to H).
h You can press the [H] button to preview the selected operation
sound.
h If “OFF” is selected, no sound is produced.
h Press the [T/]] or [W/P] button to select the desired setting,
and press the SET button.
<If “OPERATION VOL” was selected>
h The screen to select the volume for the operation sounds appears.
h You can select an operation sound volume from 1 (minimum) to
7 (maximum).
h Press the [T/]] or [W/P] button to select the volume, and
press the SET button.
4 Press the MENU button.
h The operation sound settings are completed.
HINT
iIf you keep the MENU button pressed and turn on the power, the screen to
turn the operation sounds ON/OFF appears at once. You may find this a
convenient procedure to disable the operation sounds in places you do not
want them to be audible.