Filter
Top Products
Menu Options >>
56
Beep
This sets whether or not to mute the camera sound each time you press the
camera’s buttons.
* On / Off
Display
This sets the image information display state.
* Standard / All / Off
Video Out
This sets your camera to match the system of the equipment that you are going
to connect to the camera.
* PAL/NTSC
Fr. No. Reset
This creates a new folder. The captured images are recorded to the newly
created folder from number 0001.
* Yes / No
Light Freq.
This camera supports different lighting frequencies: 50 Hz and 60 Hz. When
photographing under fluorescent lighting, select the correct frequency setting
depending in your local area’s voltage. In most parts of the world this is 50
Hertz (Hz), although in the Americas it is typically 60 Hz. Places that use 50
Hz frequency tend to use 220-240 Voltage (V), and those that use 60 Hz tend
to use 100-120 V.
* 50 Hz / 60 Hz
LCD Bright.
Select a brightness level for the LCD monitor.
* Standard / Bright
Format
Refer to page 22 of this manual titled “Formatting the Memory Card or Internal
Memory” for further details.