Filter
Top Products
(Always avoid direct sunlight when inserting the film.)
1. Pull up the Film Rewind Knob until the Back
Cover snaps open.
2. Insert the film in the Film Chamber and push the Film Rewind
Knob down to its former position.
3. Insert the film leader into the slit on the Film Take-up Spool.
4. Advance the film, making sure that the sprocket holes on the
film are fully engaged on the Sprocket Teeth.
5. Close and press the Back Cover firmly to lock it. Pull up the
Film Rewind Crank and turn it gently in the direction of the arrow
until the slack in the film has been taken up.
6. Advance the film and press the Shutter Release Button a few
times until the number "1" appears in the Exposure Counter.
As you advance the Film Advance Lever, the Film Rewind
Knob rotates indicating that the film is properly advanced.