Filter
Top Products
1. Line up the red dot on the lens mount with the
matching red dot on the camera body. or alternatively.
match the red (dot) mark on the Depth of Field Scale
to the red dot on the camera body.
2. When the lens has engaged. turn it in the direction of the
arrow until it clicks into place.
* For convenience when mounting the lens in the dark. you
can line up the Lens Mounting Locator Node with the Lens
Release Lever.
* Since the body cap has the same mount as the lens. You can
remove or mount lens cap in the same way as the lens.
3. INSERTING THE BATTERIES
The exposure metering and shutter operation of this camera are
powered by batteries, so it is important to insert the batteries correctly
for correct operation.
1. Remove the Battery Compartment Cover by turning it
counterclockwise with a coin.
2. Place the two batteries on top of each other as shown in the
illustration on the battery holder of the Battery Compartment Cover.