Filter
Top Products
Useful Features
38
Using the Remote
Control
Available modes:
TAPE-CAMERA, TAPE-VCR
Use the remote control to operate the
camcorder from a distance, such as when you
want to record yourself in a scene, or when the
camcorder is connected to a TV for use as a
VCR.
Installing the Batteries
1 Open the battery compartment cover.
2 Insert the two supplied AA (R6 or UM/
SUM-3) batteries with the battery poles
positioned as indicated.
3 Place the cover.
Activating
1 In TAPE-VCR (or CARD-VCR) mode,
press the MENU button until the menu
screen appears.
2 Press l or m on the operation button
to select I, then press the SET button.
3 Press l or m to select “REMOTE”,
then press the SET button.
4 Press l or m to select “ON”, then press
the SET button.
5 Press the MENU button to turn off the
menu screen.
Operating
Aim the remote control at the remote sensor of
the camcorder, and press the control buttons to
operate.
Notes:
• Do not use old and new batteries together or
batteries of different brands together.
• Be careful not to expose the remote sensor to
direct sunlight or strong interior lighting, as this
may prevent the remote control from operating
properly.
• Be sure that there are no obstacles between the
remote control and the remote sensor.
Useful Features
Playback
REMOTE
ON
ON
OFF
OTHERS
BEEP
REMOTE
TIME CODE
TC OUT
RETURN
Remote sensor
Approximate operating
range of remote control
ZOOM buttons (W/T)
SLOW button
PLAY button
STOP button
PAUSE/STILL button
REW button
FF button
VOLUME +/L buttons
REC START/STOP button
12
5 m
VL-NZ100H-038-041 02.2.14, 10:01 AM38