Filter
Top Products
Digital Still Camera
Features
62
Deleting All Stored Images
You can delete all stored images on a card in
one operation.
Notes:
• Deleted images cannot be restored. Check
whether or not you want the images before
performing the procedure below.
• If you want to keep some images on the card,
first delete-protect them (see page 60), and then
perform the procedure below.
1 In CARD-VCR mode, press the MENU
button until the menu screen appears.
2 Press l or m on the operation button
to select S, then press the SET button.
3 Press l or m to select “DELETE”, then
press the SET button.
4 Press l or m to select “ALL IMAGES”,
then press the SET button.
• The DELETE ALL indicator appears.
5 Press l or m to select “YES”, then
press the SET button to delete all the
images.
• To cancel deletion, press l or m to
select “NO”, then press the SET button.
6 Press the MENU button to finish the
setting.
Notes:
• The protected images cannot be deleted.
Cancel the protection setting to delete the image
(see page 60).
• If a print order is assigned to delete-protected
images and you perform the procedure above,
the print order will cancel (the protection setting
will not cancel).
• It may take several seconds to delete all images
from the card.
Caution:
• Do not turn the power off while deleting images.
ONE IMAGE
ALL IMAGES
RETURN
EFFECT
PLAYBACK
PIC.
SLIDE
DELETE
PROTECT
SHOW
PRI.
RETURN
ORDER
SET
ONE IMAGE
ALL
RETURN
IMAGES
1
4
2
5
3
6
1000
-
00
2/1PAGE
1
NORMAL
DELETE ALL
NO
YES
EFFECT
PLAYBACK
PIC.
SLIDE
DELETE
PROTECT
SHOW
PRI.
RETURN
ORDER
SET
DELETE ALL indicator
VL-NZ100H-059-067 02.2.14, 10:03 AM62