Filter
Top Products
Operating Your Camera
COLOR CCD CAMERA User’s Manual
25
COLOR CCD CAMERA User’s Manual
24
• Proper White Balance may not be obtained under the following conditions.
When the scene contains mostly high color temperature object, such as a blue
sky or sunset.
When the scene is dim.
If your camera directly faces a fluorescent lamp or is used in an environment of
varying lighting conditions.
Notes
The built-in SVIII DSP chip provides intelligent light level control to overcome the
severe ‘BACKLIGHT’ conditions.
1. Press the SET button to display the main setup menu and move the arrow
indicator to ‘BACKLIGHT’ using the UP or DOWN button.
2. SET ‘BACKLIGHT’ to the desired mode using the LEFT or RIGHT button.
WDR: Compensates for scenes simultaneously containing bright and dark elements.
OFF: Deactivation
Backlight
WDR OFF
3. Select the ' WDR' mode and Press the SET button
•You can adjust the LIMIT for WDR
4. When completed, press the SET button.
You can select the level(LOW,MIDDLE,HIGH). WDR sensitivity is increased or decreased.
• The WDR mode cannot be used if 'Shutter of Exposure Menu' is set to
'MANUAL'.
• The following phenomenon may occur when operating under the WDR mode. In
such event, do not continue use under the WDR mode.
Unnatural color change or screen phenomenon.
Screen noise on bright elements.
• WDR performance vary on bright on screen elements. Adjust the camera angle
accordingly when installing the camera to compensate.
• Making changes to the WDR LIMIT may result in unnatural screen phenomenon.
Notes
Motion Detection
alert signal upon detecting motion. When used in conjunction with an external
alarm, the user can receive MD alerts. This feature is useful when monitoring
several screens simultaneously.
1. Press the SET button to access the main setup menu and move the indicator
to 'MOTION DET' using the UP or DOWN button.
2. Set 'MOTION DET' to ON using the LEFT or RIGHT button.