Filter
Top Products
Troubleshooting
COLOR CCD CAMERA User’s Manual
45
COLOR CCD CAMERA User’s Manual
44
Refer to the following table if you are experiencing trouble with your camera.
Contact an authorized technician if the table does not provide you with a
solution to the trouble.
Problem
No display
Dim display
Dark display
The camera is not
functioning properly and
its surface is hot
Motion Detection
feature is not active.
Uneven colors
Solution
• Check the power cable and the wiring between the
camera and the monitor.
• Ensure proper video cable connection (Video Out
Jack).
• The lens could be dirty. Clean with a soft, clean
piece of cloth.
• Adjust monitor settings.
• Adjust camera position if exposed to a strong light
source.
• Adjust the monitor's contrast level.
• Set the intermediate device, if in use, to 75Ω/ Hi-z
(refer to p.15).
• Check the power source for compliance with
specifications.
• Ensure that the feature is set to ON.
• Check the SENSITIVITY level.
• Adjust and configure WHITE BAL.
Problem
Flickering
Can't select LL mode
LL is not function
properly.
Solution
• The camera may be facing the sun or a fluorescent
light. Adjust the position of the camera.
• The camera may be connected to a DC power
source. Connect to an AC power source.
• Check external SYNC signal frequency (should be
60Hz for NTSC, 50Hz for PAL).