Filter
Top Products
19
5
USING THE CAMERA
You can access and manage the camera through your web
browser. This chapter describes the Web Configuration Utility,
and provides the instructions on using the camera with a web
browser.
Web Configuration Utility
The camera must be configured through its built-in Web-based
Configuration. Whenever you want to configure the camera,
open your web browser (e.g. Internet Explorer in this manual),
and type the default IP address http://192.168.1.2 in the Address
bar and press [Enter]. When the login page appears, type
admin
in the Name and Password box, and then click
Login.
NOTE:
1. Extensive knowledge of LAN will be helpful in setting up the
camera.
2. The computer’s IP address must correspond with the camera’s IP
address in the same segment for the two devices to
communicate.