Port
Click the Port item of the Tools submenu to bring up the
following page, which allows you to setup the ports used to
transmit the camera’s data.
- Enable UPnP Control Point: Setup the Web port to
transmit the camera’s image data. The default setting is
port 80.
- Non UPnP: When you select this option, you can set up
the following items manually.
• Web Port: Setup the Web port to transmit the
camera’s image data. The default setting is port 80.
• AV Control Port: Setup the transmission of streaming
data within the network. The default setting is port
5000.
• AV Streaming Port: The default setting is port 5001.
• IP View Lite Port: The default setting is port 5100.
42